Product Overview
CURRENTLY VERIFIED ON S14 ONLY, WAITING S13 VERIFICATION
Installs on steering rack between inner tie rod in rack.
What version do I need? Look at the shaft side of your steering rack (the side where the steering shaft connects,)
Stock - this is for stock inner tie rods without any type of adapters or rack washers to increase angle
V1- this is commonly known as the gktech washer which is 6mm in thickness & also Fits Wisefab extensions
V2- this is commonly known as gktech/wisefab adapter with the larger adapter.
Modular - this version works for all 3 and will require you to snap in/on the washers depending on which style car you are aligning
How to Use:
1. Turn wheel to extend "out" tie rod
2. Slide Rack centering tool onto rack, it will be a tight fit
3. Turn wheel opposite way as in step 1 to tighten the inner tie rod to the spacer. Your rack is now centered.
4. Use a bungee cord, or proper steering wheel holding tool to keep tension on the Centering tool to ensure it doesn't move during alignment.
Removal:
1. Turn Wheel to extend "out" tie rod
2. Slide out centering tool from rack.
Made from a Durable 3D printed material. These are BEEFY and if you break one you were trying super hard.
